1. 
      
      <dl id="vjs0v"><s id="vjs0v"></s></dl>
    2. OUR PRODUCTS
      You are here: Home ? NEWS ?

      Why is the Aluminum Composite Panel Deformed?

      The Aluminum Composite Panel has many applications in our production, but when it is used, it will be deformed. Do you know why this is happening? As a Perforated Metal Sheets Factory, let’s talk about the reasons for the deformation of the Aluminum Composite Panel.
      The base sheet of the Aluminum Composite Panel is the easiest to deform. There is also the problem of the product itself, so it is very important to choose a manufacturer with good quality. We all know that the base material of Aluminum Composite Panel is mainly made up of high-density board and wood board. When we use it, especially when it is used outdoors, it may shorten its life. After the outside wind and sun, Rain will cause it to deform. Therefore, when using the Digital Printing Aluminum Composite Panel, it must be placed indoors, or the material of the inverter, such as some products that have been rust-proofed and then formed into a skeleton of angle steel and square steel.


      Aluminum Composite Panel


      If the conditions of the Aluminum Composite Panel manufacturer allow, the aluminum material can also be used as the skeleton of the aluminum composite panel. The cost of using such a metal material is much higher than that of the ordinary material, but the quality is more secure. But we can’t maintain it because it’s good quality and more secure. If this happens, it will affect the product, and the deformation problem will still happen.
      The above is the reason for the deformation of the Aluminum Composite Panel. We must pay more attention to the fact that the product must also have a certain maintenance effect so that it is more convenient to use and the life of the use will be longer.

      怡红院免费的全部视频